Are you looking for the stock ROM firmware of your device Haier Y102? If yes your answer, you are in the right page. We have given the direct link to download Haier Y102 firmware.
Download Haier Y102 stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool and the scatter file.
Download Haier Y102 Firmware
How To Flash Stock ROM Firmware On Haier Y102
Step 1: Download the stock ROM zip file given above and extract it on your computer. You will find SP flash tool and Android scatter file after extracting.
Step 2: Next, download Haier Y102 USB driver and install it in your computer. Once done, switch off your smartphone and remove the battery (it is removable).
Step 3: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.
Step 4: Once SP Flash tool is launched, click on “Download” tab.
Step 5: Now, click on “scatter-loading” button in the download tab.
Step 6: Next, click on “Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.
Step 7: Now click on the “Download” button to start the flashing process.
Step 8: Next, connect your Haier Y102 Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.
Step 9: The flashing process will begin momentarily and it will get completed in a minute or two. Once it is over, you will see the “Download OK” green ring in SP Flash Tool.
Step 10: Now, close SP Flash tool on your computer and unplug your smartphone.
That’s it. Now you have successfully flashed stock ROM firmware on your Haier Y102 Android device. If you encounter any issues while following this tutorial, do let me know via comments.