Are you looking for the stock ROM firmware of your device Intex I-Buddy Connect II 3G? If yes your answer, you are in the right page. We have given the direct link to download Intex I-Buddy Connect II 3G firmware.
Download Intex I-Buddy Connect II 3G stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, IMEI Tool and the firmware file.
Download Intex I-Buddy Connect II 3G Firmware
Stock ROM File Name: Intex_iBuddy_Connect_II_3G.zip
Stock ROM File Size: 414 MB
Android OS Version: 4.0.4
How To Flash Stock ROM Firmware In Intex I-Buddy Connect II 3G
Step 1: To get started, download the firmware file from the link given above. Once done, extract the zip file to get the “firmware.img” of your device.
Step 2: Now install Intex I-Buddy Connect II 3G USB drivers in your computer.
Step 3: Next, download Phoenix USB Pro tool and install it in your computer. Once installed, launch its Windows.
Step 4: Now click on “image” button and load the “firmware.img” file from Step 1.
Step 5: Once the firmware is loaded, click on “Start” button in the tool. Once you have done that, you will able to see a Green Tick mark in Phoenix USB Pro Window, which means that everything is ready for the firmware flashing process.
Step 6: Now switch off your Android device and remove its battery (if it is removable). Once done, press and hold the Volume Down key and connect your device to the computer using the original USB data cable. After connecting your device to the computer, keep holding the Volume Down key and press the Power button three times to allow Phoenix USB pro to detect your device.
Step 7: Once your device is successfully detected by the flash tool, firmware flashing process will start automatically and it will get finished in 3-5 minutes.
Step 8: Once the flashing process is finished, you will able to see “Finish” message in Phoenix USB pro flash tool Window.
That’s it. You have successfully flashed stock ROM firmware on your Intex I-Buddy Connect II 3G Android device. Now use the IMEI tool provided in the firmware file and flash original IMEI of your device. Once done, unplug your device from the computer and enjoy the native Android experience again.
If you encounter any issues while following this firmware installation tutorial, do let me know via comments.